What is the technical basis of connector, connector
The connector is a part of our electronic engineering and technical personneloften contact. Its role is very simple: to be blocked in the circuit between the circuit or isolated, bridge, so that the current flow of the circuit, and achieve the intended function. Connector is an indispensable electronic device components, the current flows along the channel observation, you will find that the one or more connectors. The connector form and structure is the myriads of changes, as the application object, frequency, power, the application environment is different, there are various forms of connector. For example,the connector connector and a hard disk drive with the lighting on the golf course, and the connector rocket fire is not the same. But no matter what kind of connector, to ensure the smooth and continuous and reliable current flow. Itrefers to, the connector are connected is not limited to the current, in the rapid development of optoelectronic technology today, optical system, the transmission signal vector is light, glass and plastic instead of the common circuit wire, but also use the connector optical signal pathway, they have the same function and circuit connector. Because we only care about the circuit connector, so, this course will closely Molex products, focusing on the circuitconnector and its application.
Why use connector?
Imagine if there is no connector will be how? When the circuit is used between the continuous conductor permanently connected together, such as electronicdevices to be connected to the power, we must connect the two ends of the wire, and the electronic device and a power supply by a method (such as welding) fixed then the prison. In this way, both for the production or use, havebrought a lot of inconvenience. To the car battery as an example. Assume thatthe battery cable is fixed firmly on the battery, car production plant for the installation of the battery will increase the workload, increase the productiontime and cost. The damage to the battery needs to be replaced, but also be sent to the vehicle repair station, sealing off the demolition of the old, and then welded on the new, so should pay more labor cost. A connector can avoid a lot of troubles, buy a new battery from the store, disconnect the connector, the demolition of the old battery, charging a new battery, reconnect the connectorscan be. This simple example illustrates the benefits of connector. It makes the production process more convenient, more flexible design and, reduce the production cost and maintenance cost.
Improve the production process to simplify the assembly process connector of electronic products. It simplifies the process of batch production;
Easy to repair if an electronic components failure, with a connector to be replaced quickly when the failure components;
It is convenient to upgrade with the advancement of technology, with a connector can be updated components, with a new, more perfect componentsto replace the old one to improve the flexibility of design using the connector allows engineers in the design and integration of new products, and the composition of system components, more flexibility.